On/Off Grid 100KW Hot Dip Galvanized Steel Ground Plant Piles For Solar Power Mounting Systems

On/off Grid 100KW Hot Dip Galvanized Steel Ground Plant Piles For Solar Power Mounting Systems

Solar Ground Mounting System is suitable for both small and large-scale solar plants .with a flexible connection, it can be installed onto the concrete base, and also the earth ground, even the slope can also be workable.

This system is designed to engineer with a minimum amount of installed footing at greatly reduce labor. The special tilt-in module, the clamp, and the system can be modified to be installed that make the installation easy and quick. The customized length can eliminate the weld and cut onsite to keep the high anticorrosive performance, the structure strength and the appearance.

Short Introduction:

Type: Ground solar mounting

Surface Treatment: Hot Dip Galvanizing & Anodized

Max Building Height: 20m

Ground Clearance: ≥0.15m

Span: As required

Purline: C steel

Beam: C steel

Column: Hot rolled plain steel

Installation Site: Open Field/ Ground / Earth / Concrete Ground

Applicable Module: Framed or Frameless

Module type: Any type of PV moduels

Advantages:

► Lower cost, Incomparable value

► Flexible attachment

► Faster/ Quick/secure installation, saving schedule

► Complete technical support

► Load design, Safety Guarantee

► High reliability, 10-year quality Assurance

Parameter:

Product Name	Solar Ground Mounting System
Treatment	Anodized, Galvanized
Wind Speed	60m/s
Snow Load	1.4KN/m2
Material	Steel Q235, Q245, Aluminum 6005-T5
Color	Silver Or Customized
Module Angle	10-60 Degrees According to Your Requirement or Latitude
Warranty	10 Years
Service Life	25 Years
Array Layout	According to the actual situation

Advantages:

► Widely application

The mounting system suitable for various kinds of project, including residential project, commercial project, utility project and so on.

► Professional customized design

Products were designed by the experienced designers which have the systematic design, stable structure, mature technology, can reduce the difficulty of the installation on the most conditions.

► Easy installation

The pre-assembled design of the highest level in factory simplifies construction site work to the largest degree and therefore installation is simple and quick. It can effectively improve construction efficiency, shorten construction period and reduce construction costs.

► Safety

The racking systems can stand up to the extreme weather condition. The main support components have also been tested to guarantee its structure and load-carrying capacity.

► Great Compatibility

The Tianfon mounting system compatible with most of the major framed and frameless PV modules on the market.

► Super quality

All products are made by experienced skilled staffs to operate quality. With strictly full inspected and controlled by Qc department.

Project Case:

Solar Power Generation Project 81.24MW, Located in Pakistan

Packaging & Delivery:

► Packaging Detail: Export Standard Carton With Pallet, interleaving each profile to protect the surface

► Payment Terms: L/C,D/A,D/P,T/T

► Port: Tianjin, Shanghai, Qingdao

► Delivery Detail: Delivery time:7--25 days after receiving customer’s deposits

Certification: